Rear wheel ebike kits: 5 Worth Fitting to Your Bike

As an Amazon Associate I earn from qualifying purchases. Links in this article may be affiliate links. How we choose gear

The costliest mistake with rear wheel ebike kits happens before the motor ever spins: a hub a few millimeters too wide for the dropouts, or a 7-speed freewheel on a bike built around nine gears, discovered with the old wheel already off the frame. Sending the wheel back is the cheap part. The battery bought for it and the weekend lost are not.

This 2027 roundup works from the frame outward. Maker manuals, spec pages, two hands-on reviews and a stack of owner threads supply the evidence; no kit was mounted on a bike for this article, so every claim about riding is credited to whoever reported it. A rear hub is also the sensible side to look at if grip matters, since Cyclingnews’ conversion-kit guide flags loss of traction as a weakness of front hub systems.

Five kits follow, each tied to a kind of bike: a quiet geared 500W, a cheap gearless 1,000W, a geared 750W with 700C options, a complete wheel with tire and gears, and a fat-bike hub. Batteries are separate or optional on all five.

Dropouts, gear clusters, brakes and voltage: the checks that come first

Start with a tape measure. Rear dropout width sorts kits faster than any review. The Bafang manual covers 135 to 142 mm, the Voilamart listing carries 135 mm in its title, EBIKELING’s table runs 132 mm for 26-inch and 700C wheels and 135 mm for its MTB versions, and the same table lists 175 mm for fat-bike wheels. Folding bikes with single-speed or internal-gear hubs often have a narrower 120 mm spacing, which Grin’s bike-compatibility guide says rules out standard rear hub motors. Measure between the inside faces of the dropouts.

Next, identify what carries your sprockets. A freewheel screws onto the hub; a cassette slides onto a freehub body. EBIKELING’s table lists a 7-speed freewheel and states it is not a cassette, Bafang’s manual covers cassettes up to 10-speed with the cluster not included, and an owner thread describes the Voilamart wheel as a 7-speed threaded hub. A forum member with several conversions behind him notes that hub motors are often wider than a standard rear hub, which pushes the cluster outward, and the reviews section below shows how that plays out at 8 and 9 speeds.

Brakes come third. Bafang lists V-brake and disc compatibility and ships levers or, for hydraulic brakes, sensors. Cycling Weekly says the Voilamart metal levers carry microswitches that cut motor power when you brake.

Voltage is the rule that ties the purchase together, because the pack must match the controller. Bafang and Voilamart sell 48V systems. EBIKELING’s controller accepts 36V or 48V, though its pages point to different voltages, as the third entry explains. Aluminum dropouts add one more check, covered in the torque-arm section.

Five rear wheel ebike kits compared on torque, gearing, dropouts and warranty

The table shows what each maker or reseller states. Cells marked “Not listed” are gaps in the pages read, not zeros.

Kit Motor Listed torque Rear dropout Gearing Warranty on listings
BAFANG 48V 500W Rear Hub Motor Conversion Kit Geared, 500W 65 N·m 135–142 mm Cassette up to 10-speed, cluster not included One year (manual)
Voilamart 48V 1000W Rear Wheel Electric Bicycle Conversion Kit Gearless, 1,000W 45 N·m 135 mm 7-speed threaded hub Six months (retailer mirrors)
EBIKELING Waterproof Ebike Conversion Kit Geared, 750W 50 N·m peak 132 mm (135 mm MTB) 7-speed freewheel Not listed
AW 48V 1000W Rear Wheel Electric Bicycle Motor Kit Gearless, 1,000W Not listed Not listed 7-speed cluster included None on retailer mirrors
EBIKELING 48V 1200W Fat Tire Rear Conversion Kit Direct drive, 1,200W 30 N·m peak 175 mm 7-speed freewheel Not listed

Wattage and torque do not move together in these listings: the geared 500W kit lists 65 N·m, the gearless 1,000W wheel lists 45 N·m, and the 1,200W fat-bike wheel lists 30 N·m peak. Only the BAFANG 48V 500W Rear Hub Motor Conversion Kit has a warranty the manufacturer documents itself. The other terms come from resellers or are missing, which matters if a motor fails in month seven.

Best rear wheel ebike kits, one fit situation at a time

The entries run from the best-documented kit to the most specialized one.

1. BAFANG 48V 500W Rear Hub Motor Conversion Kit — geared quiet power with real documentation

Quiet running and a proper manual make this the first geared kit to try on a derailleur bike with disc or V-brakes. Bafang’s manual lists the 500W version at 65 N·m of torque, a 40 km/h top speed, noise under 55 dB and an IPX5 water rating, for 135 to 142 mm rear dropouts and 20-inch, 26-inch, 27.5-inch or 700C wheels. That torque figure beats the 45 N·m Voilamart lists, from half the rated power.

The box holds the motor wheel, controller and controller box, thumb throttle, left-side pedal sensor, wiring harness, headlight and brake levers (or sensors for hydraulic levers). Display and battery are options, and the cassette or flywheel is not included. Gearing depends on the version: the manual for the 500W/750W kit allows up to 10 speeds, while the manual for the 20-inch kit says up to 9.

Support terms are the strongest part of the package. The manual describes a one-year repair-or-replace service, a 30-day return policy and lifetime technical guidance, with Greenergia named as the seller. Owner write-ups of this exact rear kit are scarcer than for the cheaper brands, so the case rests mostly on that paperwork. A fit lesson from another brand applies to any cassette hub, though: an Endless Sphere buyer whose cassette motor was advertised at 135 mm found it needed roughly 145 mm once the cassette was on, and swapped to a freewheel motor instead.

Check the current price on Amazon.com. The 750W sibling in the same manual lists 80 N·m and 45 km/h, which puts it at the federal 750W line rather than under it.

BAFANG 48V 500W Rear Hub Motor Conversion KitSee current price, sizes and reviews on Amazon.
Check Price on Amazon →

2. Voilamart 48V 1000W Rear Wheel Electric Bicycle Conversion Kit — low price, gearless muscle

Few rear kits cost less per watt. Retailer mirrors list this 26-inch gearless wheel at 48V and 1,000W with 45 N·m of torque, a 28 mph top speed, 11 to 12 kg of weight, a 200 kg load rating and a six-month warranty, at roughly $170 to $330 depending on seller and bundle. One mirror describes two modes: 750W up to 24 mph and 1,000W up to 28 mph. The battery is separate, and a seller’s page asks for a 48V pack of at least 11.6Ah.

Cycling Weekly’s 2022 review by Leigh Emmerson, who weighs 100 kg, called it unrefined but cheap and powerful. Fitting took an afternoon, yet the connectors were unsealed, so he enclosed the controller wiring in a plastic box and heat-shrunk the joints. The pedal sensor needed the crank off and had to be refitted after off-road riding, one throttle broke when over-twisted, and braking shows error code 2, which is the brake cutoff and not a fault. Assistance behaves like an on/off switch, and range was about 12 miles at full power on hills.

Fit reports are the larger risk. An Endless Sphere owner trying a 1,500W Voilamart found the dropouts shallow and the freewheel tight against the frame, and a reply said hand-filing the dropouts or spreading the frame is common. An Electric Bike Review member could not seat the wheel in a 1998 Giant but it dropped into a 2005 Giant Trance without trouble. A torque arm is not in the box, per Cycling Weekly, and a separate one costs around $10 to $20 on EBIKELING’s page and in a Bike Forums post.

Voilamart 48V 1000W Rear Wheel Electric Bicycle Conversion KitSee current price, sizes and reviews on Amazon.
Check Price on Amazon →

3. EBIKELING Waterproof Ebike Conversion Kit — geared 750W with 26-inch and 700C options

Gearing is the first thing to check: EBIKELING’s own table lists a 7-speed freewheel and states it is not a cassette, so a bike with 8 or 9 speeds needs a new shifter and derailleur or a different kit. The same table lists 50 N·m of peak torque, a 36V/48V 22A controller, an IP65 rating and rear dropouts of 132 mm for 26-inch and 700C wheels or 135 mm for the MTB versions. The maker’s pages disagree with each other on voltage, a 36V title against a 48V spec list, so settle the pack voltage with the seller before buying a battery.

Ownership data is better here than for most kits. An owner on ebikesforum.com wrote up six months and roughly 700 miles on the 750W rear kit and bought two more afterward. His chores list: about three hours of assembly, mostly cable routing and filing the dropout, a $29 battery adapter for each bike, careful pedal-sensor alignment, and a 52-tooth crank to pedal along at 25 mph or more. A chirp from the rear wheel traced to the spokes and stopped after he loosened the nipples and treated them with boiled linseed oil. Popsci’s roundup named EBIKELING its best-rated kit, judging by the 1,200W version, and noted the motors can be noisy.

Single reports pull the other way. A buyer on a retailer mirror says the rear hub locked up after a few weeks and the maker’s support did not help, while a buyer on a sister listing got a replacement wheel after emailing a video. One owner calls the supplied torque arms easy to use, yet the maker’s page sells one for $10.99 as an add-on, so confirm what ships. The base price on the maker’s page sits around $350 to $450 before a battery.

EBIKELING Waterproof Ebike Conversion KitSee current price, sizes and reviews on Amazon.
Check Price on Amazon →

4. AW 48V 1000W Rear Wheel Electric Bicycle Motor Kit — complete wheel with tire and gears

The wheel arrives built. Boxer Cycles describes a 26 x 1.75 inch rear wheel with tire and 7-speed cluster already fitted, a 1,000W gearless motor on 48V, a dual-mode controller (Hall and non-Hall), an LCD, and throttle, pedal assist or both. Its reviewer reports a top speed near 32 mph on the flat and calls fitting a breeze: a couple of hours for an average mechanic, with the wiring loom and throttle as the fiddly parts and pedal assist needing the cranks off. The push is compared to an invisible hand behind you, with ride quality close to a mid-drive for far less money.

Popsci agrees on value and calls the install extremely easy for a rear hub. The cost is the pack: Boxer puts the kit at about $250 and a 48V 17Ah battery with charger at $500 or more. Complaints are specific. A buyer on a retailer mirror says the wheel was too wide for a standard 26-inch mountain-bike frame and ended up half an inch off-center, and a second says the controller runs hot and needs airflow. Torque is not stated on the pages read, and retailer mirrors list no manufacturer warranty.

AW 48V 1000W Rear Wheel Electric Bicycle Motor KitSee current price, sizes and reviews on Amazon.
Check Price on Amazon →

5. EBIKELING 48V 1200W Fat Tire Rear Conversion Kit — built for wide fat-bike dropouts

Fat-bike frames start from a different measurement. EBIKELING’s size table lists 175 mm rear dropouts for its 20-inch and 26-inch fat wheels, a 4.0-inch tire, a 7-speed freewheel, a 48V/52V controller rated 30A peak and an IP65 rating, against 132 mm for the standard wheels. An older retailer mirror of the same kit family gives a 132 mm rear dropout instead, so confirm the number for your wheel with the seller. The product’s spec list also still names a 750W geared motor, which contradicts the 1200W title.

Peak torque in that table is 30 N·m, with a top speed of 24 to 27 mph on the 26-inch fat wheel. At 1,200W this is the one kit here that lands squarely in Grin’s above-1,000W case for a torque arm, and the maker’s page lists no arm in the spec while selling a universal one for $10.99. Popsci chose the 1,200W version because lower-power models left some buyers wanting acceleration, and describes it as easy to install but sometimes noisy. A buyer on a retailer mirror reports 28 mph and responsive support, a single report. The maker’s page states no domestic warranty terms and says international orders carry none.

Before ordering any of the five, read the dropout and gearing lines on the listing you are about to buy.

EBIKELING 48V 1200W Fat Tire Rear Conversion KitSee current price, sizes and reviews on Amazon.
Check Price on Amazon →

Rear wheel ebike kits reviews: where owners keep getting stuck

Fit complaints come first, and they come from several unconnected sources. A member of Electric Bike Review who has done a couple of hub-motor conversions measured his motor and freewheel at about 20 mm wider than the original wheel and cassette, which limits some frames to 8 speeds. Another poster there fixed a skipping problem with an 8-speed freewheel and an 8-speed shifter, finding the 8-speed and 9-speed freewheels nearly the same height. On Endless Sphere, an owner whose 9th gear skipped on 135 mm dropouts measured the freewheel about 6 mm taller than the cassette it replaced.

Water and heat are the second pattern. Cycling Weekly found the Voilamart connectors unsealed, Bafang’s manual tells installers to keep every connection waterproof while rating its motor IPX5, EBIKELING lists IP65, and an AW buyer says the controller needs airflow. Spokes are the third: the ebikesforum.com owner’s chirp came from the wheel build, not the motor.

Support stories split. One EBIKELING buyer was left to buy a cassette tool and a new cluster after a lockup, another got a replacement wheel quickly, and neither account is more than one person’s experience.

Weight placement deserves a note as well. Electric Bike Review’s test of a rear-mounted 750W gearless kit, a different brand, found the bike rear-heavy and top-heavy with about 25 lb added behind the rider, and advised smooth pavement and gentle turns.

Torque arms and aluminum dropouts: what a rear axle has to survive

Grin Technologies supplies the clearest figures on its torque-arm page. A 12 mm axle making 40 N·m puts just under 1,000 lb of spreading force on each dropout, and most forks let the axle spin out at roughly 60 to 90 N·m, measured on one side. Aluminum dropouts tend to crack suddenly, while steel ones spread open. Grin calls an arm unnecessary for a standard 36V 20A system when the rear has 8 to 9 mm plate dropouts with a 14 mm axle, and recommends one above about 1,000W, on front aluminum dropouts or with regenerative braking. Rear dropouts are usually thicker than front ones, though shallow vertical rear dropouts still call for an arm.

That page also puts a number on a cheap arm: a 3 mm plate adds only 20 to 30 N·m over no arm, and Grin recommends at least 5 mm. EBIKELING’s universal arm lists a 3 mm arm thickness, so treat it as a minimum, not a guarantee. Owners disagree on how much it matters. A Bike Forums member ran a 1,000W rear system in aluminum dropouts for years without an arm, while noting that most people consider one necessary. An Endless Sphere owner whose rear hub spun out says the axle turned through his arm and rounded the opening. The 1,200W EBIKELING 48V 1200W Fat Tire Rear Conversion Kit sits above Grin’s line, and the 1,000W wheels sit on it.

Rear wheel drive on a bicycle: traction, weight and the 750W line

Pulling from the back keeps the motor over the wheel that carries the rider. Boxer Cycles ranks rear hubs as nearly as good as a mid-drive for ride quality at far lower cost, ranks front hubs lowest, and notes that most e-bikes sold in the US use rear-wheel motors. The trade is mass behind you. A rack battery and a 10 kg wheel make a loaded commuter tail-heavy, so the best rear wheel ebike kit for that bike is a lighter geared motor such as the BAFANG 48V 500W Rear Hub Motor Conversion Kit, not a 1,200W direct-drive wheel.

Power limits matter before the first ride. A Consumer Product Safety Commission notice defines a low-speed e-bike as a two- or three-wheeled vehicle with fully operable pedals and a motor under 750W, with a motor-only top speed under 20 mph on a paved level surface for a 170 lb rider. It sets no speed limit for pedal-assisted riding and says nothing about conversion kits. The Voilamart 48V 1000W Rear Wheel Electric Bicycle Conversion Kit lists a 750W mode at 24 mph, and the 1,200W and 1,000W wheels exceed the definition outright. Cyclingnews notes the US allows more powerful motors and throttles depending on class and state, so check local rules on where you ride.

Gears, axles, batteries and the 750W line: straight answers

❓ Are rear wheel kits better than front wheel kits?

✅ Rear kits generally grip better and ride more naturally, according to Boxer Cycles, which ranks front hubs lowest for ride quality. They cost more fitting time, though: you move the cassette or freewheel, deal with torque arms, and carry the added weight behind you.

❓ Do rear hub kits need a torque arm?

✅ Often, yes. Grin Technologies says arms are unnecessary for a standard 36V 20A system on thick steel dropouts but advises one above about 1,000W or on shallow or aluminum dropouts. Owners are split, so a roughly $10 to $20 arm is cheap insurance.

❓ Can I keep my 9-speed cassette with a rear hub kit?

✅ Sometimes. Bafang's manual lists cassettes up to 10-speed on a 135 to 142 mm hub, while EBIKELING's kits take a 7-speed freewheel only. Owners report wider motor hubs squeezing 9-speed clusters, so check the gear count of the version you order.

❓ Does a rear wheel ebike kit include a battery?

✅ Not by default. The Voilamart and AW pages list no battery, Bafang offers one as an option, and EBIKELING's page lets you choose none. Match pack voltage to the controller; Cycling Weekly's reviewer paid roughly $200 for a 13Ah 48V pack.

❓ Is a rear hub conversion legal to ride in the US?

✅ A CPSC notice defines low-speed e-bikes as having pedals, a motor under 750W and a motor-only top speed under 20 mph, and it says nothing about conversion kits. Several kits here exceed that in some modes, and state rules on where you ride vary.

One rule for picking among five rear hubs

Measure first, then match the kit to the bike. A 135 mm derailleur frame with disc or V-brakes can take the BAFANG 48V 500W Rear Hub Motor Conversion Kit, the best-documented of the five. A tight budget and a willingness to waterproof the wiring point to the Voilamart 48V 1000W Rear Wheel Electric Bicycle Conversion Kit. A 700C or MTB wheel on a 7-speed bike suits the EBIKELING Waterproof Ebike Conversion Kit, a ready-built wheel with tire and gears is the AW 48V 1000W Rear Wheel Electric Bicycle Motor Kit, and only a 175 mm fat frame needs the EBIKELING 48V 1200W Fat Tire Rear Conversion Kit.

Among rear wheel ebike kits, the right one is whichever matches your dropout width, gear count and pack voltage. Fit a torque arm on aluminum and keep the throttle gentle for the first rides. Spotted one that fits? Compare the exact model number before buying, because wheel size and gearing change from one listing to the next.

Recommended for You

Disclaimer: This post contains affiliate links. As an Amazon Associate, we earn from qualifying purchases made through these links, at no additional cost to you.


Tape measure in hand, open the listing and match its dropout width line by line before you commit. 🚲

Author

  • NextGenEBike Team

    NextGenEBike is an independent buying-guide site for electric bikes, motors, batteries and accessories. Our editorial team compares products using manufacturer specifications, independent tests from specialist e-bike media, owner reports and retailer listings. We do not claim to have tested the products ourselves; see How We Choose Gear for our method.

    View all posts